Brother International PEDESIGN 7.0 Users Manual - English - Page 88

Automatically Converting an Image to an Embroidery Pattern (Layout & Editing/Image to Stitch Wizard) b Memo: The sew type settings of the created embroidery pattern can later be changed in the same way as the settings for other patterns. Automatically converting a photo to an embroidery pattern (Photo Stitch 1/Photo Stitch 2) I If Photo Stitch 1 (Color) is selected → A Select Mask dialog box similar to the one shown below appears. b Memo: • To display the Image Tune dialog box, where you can adjust the image, click Image Tune. • To display the image enlarged (or reduced), move the ZOOM slider up (or down). • When the dialog box appears, the square mask is selected. • To create any shape of mask, select , and then move, enter or delete points to adjust the mask shape. To add points, click the outline of the mask. To delete points, select the point, and then press the Delete key. • If Auto Generate was clicked, is selected, and the points in the outline of the mask can be moved, added or deleted. • With a single-colored background, click Auto Generate to automatically detect the outline of the image. The outline can be adjusted by moving or deleting points. a Note: If the width or height of the image exceeds 500 mm, the following message appears. When this happens, adjust the original image size. Pattern edited with the round mask b Memo: • To quit the operation and close the dialog box, click Cancel. • To return to the previous dialog box, click Previous. 1. From the list at the bottom of the dialog box, select the desired shape that the image will be trimmed to (mask). 2. In the image preview box, move the handles of the mask until it surrounds the desired part of the image. Pattern edited with the adjustable mask a Note: With a small original image, it may not be possible to reduce the size of the mask. 82