Brother International PEDESIGN 7.0 Users Manual - English - Page 165

Arranging Embroidery Designs (Layout & Editing) Motif stitch Selects whether to use pattern 1 or pattern 2 for the motif stitch. If you choose to use both patterns, the data is created to sew alternating rows of the two. Pattern1 only: Uses only pattern 1 (Default) Pattern2 only: Uses only pattern 2 Pattern1 and 2: Uses pattern 1 and pattern 2 Select a pattern for the motif stitch. Motif Pattern1 Pattern2 Direction Width (horizontal length) Height (vertical length) H-Arrange (horizontal arrangement) Click , and then, in the Browse dialog box that appeared, select the folder containing the .pmf file that you want to use. Double-click the desired pattern, or select it, and then click OK. Sets the motif pattern width (the direction along the line). Range: 2.0-100.0 mm (0.08-3.94 inches) Default: 5.0 mm (0.20 inch) Sets the motif pattern height (the direction perpendicular to the line). Range: 2.0-100.0 mm (0.08-3.94 inches) Default: 5.0 mm (0.20 inch) Sets the horizontal arrangement of the motif pattern. For patterns like , the patterns will be arranged Normal: along the line as shown at the right. Mirror: Alternate: V-Arrange (vertical arrangement) Sets the vertical arrangement of the motif pattern. For patterns like , the patterns will be arranged along the line as shown at the right. Normal: Mirror: Alternate: H-Spacing (horizontal spacing) V-Spacing (vertical spacing) Sets the horizontal spacing (the direction along the line) of motif patterns. Minimum: Depending on the pattern A negative value can be specified. Maximum: 100.0 mm (3.94 inches) Default: 0.0 mm Sets the vertical spacing (the direction perpendicular to the line) of motif patterns. Minimum: Depending on the pattern A negative value can be specified. Maximum: 100.0 mm (3.94 inches) Default: 0.0 mm Allows you to rotate the angle of the motif stitch. This setting can be specified for patterns other than manual punching patterns. Range: 0-359 degrees Default: 0 degrees H-Spacing: V-Spacing: 135° 90° 45° 180° 0° 225° 315° 270° Row Offset Run Pitch Sets the amount of offset for each row. Range: 0.0-10.0 mm (0.00-0.39 inch) Default: 0.0 mm (0.00 inch) Sets the pitch of the sewing. Range: 1.0-10.0 mm (0.04-0.39 inch) Default: 10.0 mm (0.39 inch) 159