Brother International PEDESIGN 7.0 Users Manual - English - Page 164

Arranging Embroidery Designs (Layout & Editing) Pull Compensation Lengthens the sewing region in the stitch pattern's sewing direction to prevent pattern shrinkage during sewing. Range: 2.0-10.0 mm (0.08-0.39 inch) Default: 0.0 mm (0.00 inch) Select a pattern for programmable fill stitch. Width (horizontal length) Height (vertical length) Direction Click , and then, in the Browse dialog box that appeared, select the folder containing the .pas file that you want to use. Double-click the desired pattern, or select it, and then click OK. Sets the programmable fill pattern width. Range: 5.0-10.0 mm (0.20-0.39 inch) Default: 7.5 mm (0.30 inch) Sets the programmable fill pattern height. Range: 5.0-10.0 mm (0.20-0.39 inch) Default: 7.5 mm (0.30 inch) Allows you to rotate the angle of the programmable fill patterns. Range: 0-359 degrees Default: 0 degrees 135° 90° 45° 180° 0° 225° 315° 270° Offset Programmable fill Base Sewing Specifies the base stitching. Direction Sets the direction of the offset as row/column. row column Value Stitch Type When the pattern's arrangement is offset, sets the amount of offset. Range: 0-99% Default: 0% Specifies the shape of stitching on the edges. Available only when the Base Sewing check box is selected. Available settings: , Default: (for all objects other than text) (for text) Step Pitch Sets the pitch of the stitching for the base of a programmable fill stitch. Available only when the Base Sewing check box is Step pitch: selected. Range: 1.0-10.0 mm (0.04-0.39 inch) Default: 4.0 mm (0.16 inch) Sets the spacial frequency steps of the stitching for the base of a programmable fill stitch. Available only when the Base Sewing check box is Frequency selected. 30% 0% Range: 0-99% Default: 30% Pattern The stitching for the base (area other than the pattern indicated by the diagonal lines) of the programmable fill stitch can be set. The pattern is sewn with the specified stitching. 158