Brother International PEDESIGN 7.0 Users Manual - English - Page 49

Tutorial a Note: Before using the original card, make sure that the designs on the card are no longer needed or make sure to store them on your hard drive or other storage media. → The following message appears. 2 Insert an original card into the USB card writer module. a Note: The original card is inserted correctly when you hear it snap into place. 3 Transfer the embroidery pattern. Click OK. a Note: • If the card writer module is not correctly connected or powered, an error message of "No card writer module is connected. Please connect card writer module." will appear. • If the original card is not inserted or is defective, an error message of "No original card is inserted. Please insert an original card." will appear. 4 Quit Layout & Editing. Click File, then Write to Card. → The following message appears. Click OK. 43 Click File, then Exit. b Memo: In Layout & Editing, the pattern is saved as a .pes file. To save the pattern, click File in Layout & Editing, then Save as.