Brother International PEDESIGN 7.0 Users Manual - English - Page 228

Manually Creating Embroidery Patterns From Images (Design Center) Select a pattern for programmable fill stitch. Click , and then, in the Browse dialog box that appeared, select the folder containing the .pas file that you want to use. Double-click the desired pattern, or select it, and then click OK. Sets the programmable fill pattern width. Width (horizontal length) Range: 5.0 - 10.0 mm (0.20 - 0.39 inch) Default: 7.5 mm (0.30 inch) Height (vertical length) Sets the programmable fill pattern height. Range: 5.0 - 10.0 mm (0.20 - 0.39 inch) Default: 7.5 mm (0.30 inch) Direction Allows you to rotate the angle of the programmable fill patterns. Range: 0-359 degrees Default: 0 degrees 90° 135° 45° 180° 0° 225° 315° 270° Programmable Offset fill Direction Sets the direction of the offset as row/column. row column Value When the pattern's arrangement is offset, sets the amount of offset. Range: 0-99% Default: 0% Base Sewing Specifies the base stitching. (For details, refer to the illustration below.) Stitch Type Specifies the shape of stitching on the edges. Available only when the Base Sewing check box is selected. Available settings: , Default: Step Pitch Sets the pitch of the stitching for the base of a programmable fill stitch. Available only when the Base Sewing check box is selected. Step pitch: Range: 1.0 - 10.0 mm (0.04 - 0.39 inch) Default: 4.0 mm (0.16 inch) Sets the spacial frequency steps of the stitching for the base of a programmable fill stitch. Available only when the Base Sewing check box is Frequency selected. 30% 0% Range: 0 - 99% Default: 30% Pattern The stitching for the base (area other than the pattern indicated by the diagonal lines) of the programmable fill stitch can be set. The pattern is sewn with the specified stitching. 222