Brother International PEDESIGN 7.0 Users Manual - English - Page 77

Tutorial Step 6 Transferring the design to an original card By writing a design to a media that can be used in your embroidery machine and transferring it to your embroidery machine, you can actually sew the design. For this example, we will transfer the design to an original card. b Memo: For other media you may use include floppy disks, compact flash memory, USB media and etc. 1 Insert an original card into the USB card writer module. a Note: The original card is inserted correctly when you hear it snap into place. 2 Transfer the embroidery design. a Note: Before using the original card, make sure that the designs on the card are no longer needed or make sure to store them on your hard drive or other storage media. → The following message appears. Click OK. a Note: • If the card writer module is not correctly connected or powered, an error message of "No card writer module is connected. Please connect card writer module." will appear. • If the original card is not inserted or is defective, an error message of "No original card is inserted. Please insert an original card." will appear. 3 Quit Layout & Editing. Click File, then Write to Card. → The following message appears. Click File, then Exit. Click OK. 71