Brother International PEDESIGN 7.0 Users Manual - English - Page 167

Arranging Embroidery Designs (Layout & Editing) Manual punch Feathered edge Sets which edge of the stitching that the feathered edge is applied to. Set when the block sewtype is Satin Stitch, Fill Stitch, or Prog. Fill Stitch. Top: Feathered edge is sewn on the top edge. Bottom: Feathered edge is sewn on the bottom edge. When creating data with a Manual Punch tool, the top edge is the side containing the first and third points, and the bottom edge is the side containing the second and fourth points. Feather edge applied to the top: Select a pattern for the feathered edge. Length Click , and then, in the Browse dialog box that appeared, double-click the desired pat- tern, or select it, and then click OK. Sets the length of the feathered edge. Range: 0.2-100.0 mm (0.01-3.94 inches) Default: 3.0 mm (0.12 inch) Notes on programmable fill stitches and stamps When setting the sew type and pattern directions of a programmable fill stitch or a stamp, lines will not be sewn if the sew type and pattern direction settings cause a stitch to be sewn in the same direction as a line in the stitch pattern. Use the Preview function to view exactly how the stitch pattern will be sewn, and then set the stitch direction and pattern direction according to the selected sew type or to the effect that you want to produce. To get an even better view, make test samples of different settings. Examples of programmable fill stitching: Example 1 Stitch direction: 45° (default) Example 2 Stitch direction: 90° Example 3 Stitch direction: 0° c "Displaying a preview of the embroidery" on page 172 and on "Creating Custom Stitch Patterns (Programmable Stitch Creator)" on page 256 161