Netgear M4100-26G CLI Manual - Page 118
port-channel name, port-channel system priority, no port-channel load-balance
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
ProSafe M4100 and M7100 Managed Switches Term 1 2 3 4 5 6 7 | all Definition Source MAC, VLAN, EtherType, and incoming port associated with the packet Destination MAC, VLAN, EtherType, and incoming port associated with the packet Source/Destination MAC, VLAN, EtherType, and incoming port associated with the packet Source IP and Source TCP/UDP fields of the packet Destination IP and Destination TCP/UDP Port fields of the packet Source/Destination IP and source/destination TCP/UDP Port fields of the packet Enhanced Hashing Mode Global Config Mode only: The interface is a logical slot/port number of a configured port-channel. "All" applies the command to all currently configured port-channels. no port-channel load-balance This command reverts to the default load balancing configuration. Format Mode no port-channel load-balance { | } Interface Config Global Config Term | all Definition Global Config Mode only: The interface is a logical slot/port number of a configured port-channel. "All" applies the command to all currently configured port-channels. port-channel name This command defines a name for the port-channel (LAG). The interface is a logical slot/port for a configured port-channel, and is an alphanumeric string up to 15 characters. Format Mode port-channel name { | } Global Config port-channel system priority Use this command to configure port-channel system priority. The valid range of is 0-65535. Default 0x8000 Switching Commands 118