Netgear M4100-26G CLI Manual - Page 439
Use this command to display a summary of the host interface status parameters.
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 439 highlights
ProSafe M4100 and M7100 Managed Switches show ipv6 mld-proxy Use this command to display a summary of the host interface status parameters. Format Mode show ipv6 mld-proxy • Privileged EXEC • User EXEC The command displays the following parameters only when you enable MLD-Proxy. Field Description Interface Index The interface number of the MLD-Proxy. Admin Mode Indicates whether MLD-Proxy is enabled or disabled. This is a configured value. Operational Mode Indicates whether MLD-Proxy is operationally enabled or disabled. This is a status parameter. Version The present MLD host version that is operational on the proxy interface. Number of Multicast Groups The number of multicast groups that are associated with the MLD-Proxy interface. Unsolicited Report Interval The time interval at which the MLD-Proxy interface sends unsolicited group membership report. Querier IP Address on Proxy The IP address of the Querier, if any, in the network attached to the Interface upstream interface (MLD-Proxy interface). Older Version 1 Querier Timeout The interval used to timeout the older version 1 queriers. Proxy Start Frequency The number of times the MLD-Proxy has been stopped and started. Example: The following shows example CLI display output for the command. (Switch) #show ipv6 mld-proxy Interface Index 0/3 Admin Mode Enable Operational Mode Enable Version 3 Num of Multicast Groups 0 Unsolicited Report Interval 1 Querier IP Address on Proxy Interface........ fe80::1:2:5 Older Version 1 Querier Timeout 00:00:00 Proxy Start Frequency IPv6 Multicast Commands 439