Netgear M4100-26G CLI Manual - Page 33

ProSafe M4100 and M7100 Managed Switches spanning-tree configuration revision This command sets the Configuration Identifier Revision Level for use in identifying the configuration that this switch is currently using. The Configuration Identifier Revision Level is a number in the range of 0-65535. Default Format Mode 0 spanning-tree configuration revision Global Config no spanning-tree configuration revision This command sets the Configuration Identifier Revision Level for use in identifying the configuration that this switch is currently using to the default value. Format Mode no spanning-tree configuration revision Global Config spanning-tree edgeport This command specifies that this port is an Edge Port within the Common and Internal Spanning Tree. This allows this port to transition to Forwarding State without delay. Default Format Mode enabled spanning-tree edgeport Interface Config no spanning-tree edgeport This command specifies that this port is not an Edge Port within the Common and Internal Spanning Tree. Format Mode no spanning-tree edgeport Interface Config spanning-tree forceversion This command sets the Force Protocol Version parameter to a new value. Default Format Mode 802.1s spanning-tree forceversion Global Config • Use 802.1d to specify that the switch transmits ST BPDUs rather than MST BPDUs (IEEE 802.1d functionality supported). Switching Commands 33