Netgear M4100-26G CLI Manual - Page 339
show ip pim ssm, Example 1, This command shows the con d source-specific IP multicast addresses.
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 339 highlights
ProSafe M4100 and M7100 Managed Switches Term Definition PIM Mode Configured mode of PIM protocol (enabled or disabled). Interface Interface number. Interface-Mode Enable status of the interface. Operational-Sta Operational Status of the Interface. tus Example 1: (Switch) #show ip pim PIM Mode Dense Interface Interface-Mode Operational-Status 0/1 Enabled Operational 0/3 Disabled Non-Operational Example 2: (Switch) #show ip pim PIM Mode Sparse Interface Interface-Mode Operational-Status 0/1 Enabled Operational 0/3 Disabled Non-Operational show ip pim ssm This command shows the configured source-specific IP multicast addresses. Format Mode show ip pim ssm Privileged EXEC Term Definition Group Address The address of the SSM Group. Prefix Length Prefix Length of the SSM Group. (Switch) #show ip pim ssm Group Address/Prefix Length 232.0.0.0/8 IP Multicast Commands 339