Netgear M4100-26G CLI Manual - Page 684

ProSafe M4100 and M7100 Managed Switches radius server key Use this command to configure the key to be used in RADIUS client communication with the specified server. Depending on whether the 'auth' or 'acct' token is used, the shared secret is configured for the RADIUS authentication or RADIUS accounting server. The IP address or hostname provided must match a previously configured server. When this command is executed, the secret is prompted. Text-based configuration supports Radius server's secrets in encrypted and non-encrypted format. When you save the configuration, these secret keys are stored in encrypted format only. If you want to enter the key in encrypted format, enter the key along with the encrypted keyword. In the show running config command's display, these secret keys are displayed in encrypted format. You cannot show these keys in plain text format. Note: The secret must be an alphanumeric value not exceeding 16 characters. Format Mode radius server key {auth | acct} {} encrypted Global Config Field ipaddr dnsname password Description The IP address of the server. The DNS name of the server. The password in encrypted format. The following shows an example of the CLI command. radius server key acct 10.240.4.10 encrypted radius server msgauth Use this command to enable the message authenticator attribute to be used for the specified RADIUS Authenticating server. Format Mode radius server msgauth Global Config Management Commands 684