Netgear M4100-26G CLI Manual - Page 48
vlan database, network mgmt_vlan, no vlan
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
ProSafe M4100 and M7100 Managed Switches vlan database This command gives you access to the VLAN Config mode, which allows you to configure VLAN characteristics. Format Mode vlan database Privileged EXEC network mgmt_vlan This command configures the Management VLAN ID. Default Format Mode 1 network mgmt_vlan Privileged EXEC no network mgmt_vlan This command sets the Management VLAN ID to the default. Format Mode no network mgmt_vlan Privileged EXEC vlan This command creates a new VLAN and assigns it an ID. The ID is a valid VLAN identification number (ID 1 is reserved for the default VLAN). The vlan-list contains VlanId's in range . Separate non-consecutive IDs with ',' and no spaces and no zeros in between the range; Use '-' for range. Format Mode vlan VLAN Config no vlan This command deletes an existing VLAN. The ID is a valid VLAN identification number (ID 1 is reserved for the default VLAN). The vlan-list contains VlanId's in range . Separate non-consecutive IDs with ',' and no spaces and no zeros in between the range; Use '-' for range. Format Mode no vlan VLAN Config Switching Commands 48