Netgear M4100-26G CLI Manual - Page 490

ProSafe M4100 and M7100 Managed Switches no periodic Use this command to delete a periodic time entry from a time range. Format Mode no periodic {days-of-the-week time} to {[days-of-the-week] time} Time-Range Config periodic {start|end} time Use this command to configure the start/end time for the time-range. Format Mode periodic {start|end} time Time-Range Config show time-range Use this command to display a time range and all the absolute/periodic time entries that are defined for the time range. Use the name parameter to identify a specific time range to display. When name is not specified, all the time ranges defined in the system are displayed. Format Mode show time-range Privileged EXEC Term Number of Time Ranges Time Range Name Time Range Status Absolute start Absolute end Periodic Entries Periodic start Periodic end Definition Number of time ranges configured in the system. Name of the time range. Status of the time range (active/inactive). Start time and day for absolute time entry. End time and day for absolute time entry. Number of periodic entries in a time-range. Start time and day for periodic entry. End time and day for periodic entry. AutoVOIP AutoVoIP detects the VoIP streams and put the VoIP streams in the specific VLAN (auto-voip VLAN) and provides higher Class of Service to the VoIP streams automatically (both data and signaling). It detects the VoIP streams in two modes. Protocol-based Auto VoIP Quality of Service (QoS) Commands 490