Netgear M4100-26G CLI Manual - Page 352

ProSafe M4100 and M7100 Managed Switches Term Ver Query Rcvd Report Rcvd Report Sent Leaves Rcvd Leaves Sent Definition The IGMP version. Number of IGMP queries received. Number of IGMP reports received. Number of IGMP reports sent. Number of IGMP leaves received. Valid for version 2 only. Number of IGMP leaves sent on the Proxy interface. Valid for version 2 only. Example: The following shows example CLI display output for the command. (Switch) #show ip igmp-proxy interface Interface Index 0/1 Ver Query Rcvd Report Rcvd Report Sent Leave Rcvd Leave Sent 1 0 0 0 ----- ----- 2 0 0 0 0 0 3 0 0 0 ----- ----- show ip igmp-proxy groups This command displays information about the subscribed multicast groups that IGMP Proxy reported. It displays a table of entries with the following as the fields of each column. Format Modes show ip igmp-proxy groups • Privileged EXEC • User EXEC Term Definition Interface The interface number of the IGMP Proxy. Group Address The IP address of the multicast group. Last Reporter The IP address of host that last sent a membership report for the current group on the network attached to the IGMP Proxy interface (upstream interface). Up Time (in secs) The time elapsed since last created. Member State The status of the entry. Possible values are IDLE_MEMBER or DELAY_MEMBER. • IDLE_MEMBER - interface has responded to the latest group membership query for this group. • DELAY_MEMBER - interface is going to send a group membership report to respond to a group membership query for this group. IP Multicast Commands 352