Netgear M4100-26G CLI Manual - Page 392

ProSafe M4100 and M7100 Managed Switches clear ipv6 ospf neighbor interface To drop adjacency with all neighbors on a specific interface, use the optional parameter [slot/port]. To drop adjacency with a specific router ID on a specific interface, use the optional parameter [neighbor-id]. Format Mode clear ipv6 ospf neighbor interface [slot/port] [neighbor-id] Privileged EXEC clear ipv6 ospf redistribution Use this command to flush all self-originated external LSAs. Reapply the redistribution configuration and reoriginate prefixes as necessary. Format Mode clear ipv6 ospf redistribution Privileged EXEC default-information originate (OSPFv3) This command is used to control the advertisement of default routes. Default Format Mode • metric-unspecified • type-2 default-information originates [always] [metric ] [metric-type {1 | 2}] Router OSPFv3 Config no default-information originates (OSPFv3) This command is used to control the advertisement of default routes. Format Mode no default-information originates [metric] [metric-type] Router OSPFv3 Config default-metric (OSPFv3) This command is used to set a default for the metric of distributed routes. Format Mode default-metric Router OSPFv3 Config IPv6 Commands 392