Netgear M4100-26G CLI Manual - Page 251

ProSafe M4100 and M7100 Managed Switches required when authorization type is simple text apssword. The parameter is the virtual router IFD which has an integer value range from 1 to 255. Default Format Mode no authorization ip vrrp authentication {none | simple } Interface Config no ip vrrp authentication This command sets the default authorization details value for the virtual router configured on a specified interface. Format Mode no ip vrrp authentication Interface Config ip vrrp preempt This command sets the preemption mode value for the virtual router configured on a specified interface. The parameter is the virtual router ID, which is an integer from 1 to 255. Default Format Mode enabled ip vrrp preempt Interface Config no ip vrrp preempt This command sets the default preemption mode value for the virtual router configured on a specified interface. Format Mode no ip vrrp preempt Interface Config ip vrrp priority This command sets the priority of a router within a VRRP group. Higher values equal higher priority. The range is from 1 to 254. The parameter is the virtual router ID, whose range is from 1 to 255. The router with the highest priority is elected master. If a router is configured with the address used as the address of the virtual router, the router is called the "address owner." The priority of the address owner is always 255 so that the address owner is always master. If the master has a priority less than 255 (it is not the address owner) and you configure the priority of Routing Commands 251