Netgear M4100-26G CLI Manual - Page 502
PoE Commands, poe detection
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 502 highlights
ProSafe M4100 and M7100 Managed Switches PoE Commands poe Use this command to enable the Power over Ethernet (PoE) functionality on a global basis or per interface. Format Mode Default poe Global Config Interface Config enabled no poe Use this command to disable the Power over Ethernet (PoE) functionality on a global basis or per interface. Format Mode no poe Global Config Interface Config poe detection Use this command to configure the detection type on a global basis or per interface. It is used to configure which types of PDs will be detected and powered by the switch. There are three options: • ieee-Detect resistive-type devices (IEEE standard) • pre-ieee-Legacy capacitive detection only (nonstandard) • auto-Perform resistive detection first (IEEE standard) and capacitive detection (pre-IEEE standard) Format Mode Default poe detection { ieee | pre-ieee | auto} Global Config Interface Config auto Power over Ethernet (PoE) Commands 502