Netgear M4100-26G CLI Manual - Page 300

ProSafe M4100 and M7100 Managed Switches If you specify an IP address for the neighbor router, the following fields display: Term Definition Interface Valid slot and port number separated by forward slashes. Neighbor IP Address The IP address of the neighbor router. Interface Index The interface ID of the neighbor router. Area ID The area ID of the OSPF area associated with the interface. Options An integer value that indicates the optional OSPF capabilities supported by the neighbor. The neighbor's optional OSPF capabilities are also listed in its Hello packets. This enables received Hello Packets to be rejected (that is, neighbor relationships will not even start to form) if there is a mismatch in certain crucial OSPF capabilities. Router Priority The OSPF priority for the specified interface. The priority of an interface is a priority integer from 0 to 255. A value of '0' indicates that the router is not eligible to become the designated router on this network. Dead Timer Due The amount of time, in seconds, to wait before the router assumes that the neighbor is unreachable. Up Time Neighbor uptime; how long since the adjacency last reached the Full state. State The state of the neighboring routers. Events The number of times this neighbor relationship has changed state, or an error has occurred. Retransmission An integer representing the current length of the retransmission queue of the specified Queue Length neighbor router Id of the specified interface. The following shows example CLI display output for the command. (Switch) #show ip ospf neighbor 170.1.1.50 Interface 0/17 Neighbor IP Address 170.1.1.50 Interface Index 17 Area Id 0.0.0.2 Options 0x2 Router Priority 1 Dead timer due in (secs 15 Up Time 0 days 2 hrs 8 mins 46 secs State Full/BACKUP-DR Events 4 Retransmission Queue Length 0 Routing Commands 300