Netgear M4100-26G CLI Manual - Page 325

ProSafe M4100 and M7100 Managed Switches If you use the detail parameter, the command displays the following fields: Term Source IP Group IP Expiry Time Up Time RPF Neighbor Flags Definition The IP address of the multicast data source. The IP address of the destination of the multicast packet. The time of expiry of this entry in seconds. The time elapsed since the entry was created in seconds. The IP address of the RPF neighbor. The flags associated with this entry. If you use the summary parameter, the command displays the following fields: Term Source IP Group IP Protocol Incoming Interface Outgoing Interface List Definition The IP address of the multicast data source. The IP address of the destination of the multicast packet. The multicast routing protocol by which the entry was created. The interface on which the packet for the source/group arrives. The list of outgoing interfaces on which the packet is forwarded. show ip mcast mroute group This command displays the multicast configuration settings such as flags, timer settings, incoming and outgoing interfaces, RPF neighboring routers, and expiration times of all the entries in the multicast mroute table containing the given . Format Modes show ip mcast mroute group {detail |summary} • Privileged EXEC • User EXEC Term Source IP Group IP Protocol Incoming Interface Outgoing Interface List Definition The IP address of the multicast data source. The IP address of the destination of the multicast packet. The multicast routing protocol by which this entry was created. The interface on which the packet for this group arrives. The list of outgoing interfaces on which this packet is forwarded. IP Multicast Commands 325