Netgear M4100-26G CLI Manual - Page 450
Quality of Service QoS Commands, ProSafe M4100 and M7100 Managed Switches, Non-IP Traffic, Class
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 450 highlights
ProSafe M4100 and M7100 Managed Switches Term Non-IP Traffic Class Untrusted Traffic Class Definition The traffic class used for non-IP traffic. This is only displayed when the COS trust mode is set to trust IP Precedence or IP DSCP (on platforms that support IP DSCP). The traffic class used for all untrusted traffic. This is only displayed when the COS trust mode is set to 'untrusted'. show interfaces cos-queue This command displays the class-of-service queue configuration for the specified interface. The slot/port parameter is optional and is only valid on platforms that support independent per-port Class of Service mappings. If specified, the class-of-service queue configuration of the interface is displayed. If omitted, the most recent global configuration settings are displayed. Format Mode show interfaces cos-queue [] Privileged EXEC Term Definition Queue Id An interface supports n queues numbered 0 to (n-1). The specific n value is platform-dependent. Minimum Bandwidth The minimum transmission bandwidth guarantee for the queue, expressed as a percentage. A value of 0 means bandwidth is not guaranteed and the queue operates using best-effort. This is a configured value. Scheduler Type Indicates whether this queue is scheduled for transmission using a strict priority or a weighted scheme. This is a configured value. Queue Management Type The queue depth management technique used for this queue (tail drop). If you specify the interface, the command also displays the following information. Term Interface Interface Shaping Rate Definition The slot/port of the interface. If displaying the global configuration, this output line is replaced with a Global Config indication. The maximum transmission bandwidth limit for the interface as a whole. It is independent of any per-queue maximum bandwidth value(s) in effect for the interface. This is a configured value. Quality of Service (QoS) Commands 450