Netgear M4100-26G CLI Manual - Page 612

ProSafe M4100 and M7100 Managed Switches show llpf interface all Use this command to display the status of LLPF rules configured on a particular port or on all ports. Format Mode show llpf interface [all | slot/port] Privileged EXEC Term Block ISDP Block VTP Block DTP Block UDLD Block PAGP Block SSTP Block All Definition Shows whether the port blocks ISDP PDUs. Shows whether the port blocks VTP PDUs. Shows whether the port blocks DTP PDUs. Shows whether the port blocks UDLD PDUs. Shows whether the port blocks PAGP PDUs. Shows whether the port blocks SSTP PDUs. Shows whether the port blocks all proprietary PDUs available for the LLDP feature. RMON Stats and History Commands The various MIBs within RFC 2819, 3273, and 3434 are arranged into groups. The managed switch supports some of the groups in these RFCs but not all. The managed switch complies with MODULE-COMPLIANCE and OBJECT-GROUP definitions within these RFCs for supporting individual groups. The managed switch supports the following groups: RFC 2819 • Group 1 - Statistics Contains cumulative traffic and error statistics. • Group 2 - History Generates reports from periodic traffic sampling that are useful for analyzing trends. This group includes History Control Group and Ethernet History Group. • Group 3 - Alarm Enables the definition and setting of thresholds for various counters. Thresholds can be passed in either a rising or falling direction on existing MIB objects, primarily those in the Statistics group. An alarm is triggered when a threshold is crossed and the alarm is passed to the Event group. The Alarm requires the Event Group. Utility Commands 612