Netgear M4100-26G CLI Manual - Page 340

ProSafe M4100 and M7100 Managed Switches show ip pim bsr-router This command displays the bootstrap router (BSR) information. The output includes elected BSR information and information about the locally configured candidate rendezvous point (RP) advertisement. Format Mode show ip pim bsr-router [candidate | elected] • Privileged EXEC • User EXEC Term Definition BSR Address IP address of the BSR. BSR Priority For candidate it is the configured priority and for elected BSR it is the learned priority.. BSR Hash Mask Configured or learned hash mask length of the BSR. Length Next Bootstrap message Time (in hours, minutes, and seconds) in which to send the next bootstrap message from this BSR. Next Candidate RP Advertisement in Time (in hours, minutes, and seconds) in which the next CRP advertisement will be sent. This field is applicable only for the elected RP. (Switch) #show ip pim bsr-router candidate BSR Address 192.168.10.1 BSR Priority 0 BSR Hash Mask Length 32 Next Bootstrap message (hh:mm:ss) NA Next Candidate RP Advertisement (hh:mm:ss)NA (Switch) #show ip pim bsr-router elected BSR Address 192.168.10.1 BSR Priority 0 BSR Hash Mask Length 32 Next Bootstrap message (hh:mm:ss) 00:00:05 Next Candidate RP Advertisement (hh:mm:ss)00:00:02 show ip pim rp-hash This command displays the rendezvous point selected for the specified group address.. Format Modes show ip pim rp-hash Privileged EXEC Term RP Address Type Definition Address of the RP for the group specified. Origin from where this group mapping is learned. (Switch) # show ip pim rp-hash 224.1.2.0 RP Address 192.168.10.1 Type Static IP Multicast Commands 340