Netgear M4100-26G CLI Manual - Page 492
auto-voip vlan, auto-voip oui-based priority, auto-voip protocol-based {remark | traffic-class}
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 492 highlights
ProSafe M4100 and M7100 Managed Switches no auto-voip oui This command is to delete already configured OUI. Format Mode no auto-voip oui Global Config auto-voip vlan This command is used to configure the global Auto VoIP VLAN id. The VLAN behavior is depend on the configured auto VoIP mode. Format Mode Default auto-voip vlan Global Config None no auto-voip vlan This command is used to set the auto-voip VLAN to the default 2. Format Mode no auto-voip vlan Global Config auto-voip oui-based priority This command is used to configure the global OUI based auto VoIP priority. If the phone OUI is matches one of the configured OUI, the priority of traffic from the phone is changed to OUI priority configured through this command. Format Mode Default auto-voip oui-based priority Global Config Highest available priority no auto-voip oui-based priority This command is used to set the priority to the default value. Format Mode no auto-voip oui-based priority Global Config auto-voip protocol-based {remark | traffic-class} This command is used to configure the global protocol based auto-VoIP remarking priority/traffic-class. If the remark priority is configured, the voice data of the session is remarked with the priority configured through this command. Quality of Service (QoS) Commands 492