Netgear M4100-26G CLI Manual - Page 331
PIM Commands, Format, Modes, Group IP, Source IP, Source Mask, Expiry Time, Source Address, Upstream
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 331 highlights
ProSafe M4100 and M7100 Managed Switches show ip dvmrp prune This command displays the table listing the router's upstream prune information. Format Modes show ip dvmrp prune • Privileged EXEC • User EXEC Term Group IP Source IP Source Mask Expiry Time (secs) Definition The multicast Address that is pruned. The IP address of the source that has pruned. The network Mask for the prune source. It should be all 1s or both the prune source and prune mask must match. The expiry time in seconds. This is the time remaining for this prune to age out. show ip dvmrp route This command displays the multicast routing information for DVMRP. Format Modes show ip dvmrp route • Privileged EXEC • User EXEC Term Definition Source Address The multicast address of the source group. Source Mask The IP Mask for the source group. Upstream Neighbor The IP address of the neighbor which is the source for the packets for a specified multicast address. Interface The interface used to receive the packets sent by the sources. Metric The distance in hops to the source subnet. This field has a different meaning than the Interface Metric field. Expiry Time (secs) The expiry time in seconds, which is the time left for this route to age out. Up Time (secs) The time when a specified route was learnt, in seconds. PIM Commands This section describes the commands you use to configure Protocol Independent Multicast (PIM). PIM is a multicast routing protocol that provides scalable inter-domain multicast IP Multicast Commands 331