Netgear M4100-26G CLI Manual - Page 709

ProSafe M4100 and M7100 Managed Switches Core Table 3. BSP Log Messages Component BSP BSP Message Event(0xaaaaaaaa) Starting code... Cause Switch has restarted. BSP initialization complete, starting 7000 series application. Table 4. NIM Log Messages Component NIM NIM NIM NIM NIM NIM NIM NIM NIM NIM NIM NIM Message Cause NIM: L7_ATTACH out of order for intIfNum(x) unit x slot x port x Interface creation out of order NIM: Failed to find interface at unit x slot x There is no mapping between the USP and port x for event(x) Interface number NIM: L7_DETACH out of order for intIfNum(x) unit x slot x port x Interface creation out of order NIM: L7_DELETE out of order for intIfNum(x) unit x slot x port x Interface creation out of order NIM: event(x),intf(x),component(x), in wrong phase An event was issued to NIM during the wrong configuration phase (probably Phase 1, 2, or WMU) NIM: Failed to notify users of interface change Event was not propagated to the system NIM: failed to send message to NIM message Queue. NIM message queue full or non-existent NIM: Failed to notify the components of L7_CREATE event NIM: Attempted event (x), on USP x.x.x before phase 3 Interface not created A component issued an interface event during the wrong initialization phase NIM: incorrect phase for operation An API call was made during the wrong initialization phase NIM: Component(x) failed on event(x) for A component responded with a fail intIfNum(x) indication for an interface event NIM: Timeout event(x), intIfNum(x) remainingMask = "xxxx" A component did not respond before the NIM timeout occurred Log Messages 709