Netgear M4100-26G CLI Manual - Page 126

ProSafe M4100 and M7100 Managed Switches 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The parameter must identify a valid VLAN. Format Mode macfilter addsrc all Global Config no macfilter addsrc all This command removes all interfaces to the source filter set for the MAC filter with the MAC address of and VLAN of . You must specify the parameter as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The parameter must identify a valid VLAN. Format Mode no macfilter addsrc all Global Config show mac-address-table static This command displays the Static MAC Filtering information for all Static MAC Filters. If you select , all the Static MAC Filters in the system are displayed. If you supply a value for , you must also enter a value for , and the system displays Static MAC Filter information only for that MAC address and VLAN. Format Mode show mac-address-table static { | all} Privileged EXEC Term MAC Address VLAN ID Source Port(s) Definition The MAC Address of the static MAC filter entry. The VLAN ID of the static MAC filter entry. The source port filter set's slot and port(s). Note: Only multicast address filters will have destination port lists. show mac-address-table staticfiltering This command displays the Static Filtering entries in the Multicast Forwarding Database (MFDB) table. Format Mode show mac-address-table staticfiltering Privileged EXEC Switching Commands 126