Netgear M4100-26G CLI Manual - Page 418

ProSafe M4100 and M7100 Managed Switches show ipv6 dhcp interface This command displays DHCPv6 information for all relevant interfaces or the specified interface. If you specify an interface, you can use the optional statistics parameter to view statistics for the specified interface. Format Mode show ipv6 dhcp interface [statistics] Privileged EXEC Term IPv6 Interface Mode Definition The interface name in format. Shows whether the interface is a IPv6 DHCP relay or server. If the interface mode is server, the following information displays. Term Pool Name Server Preference Option Flags Definition The pool name specifying information for DHCPv6 server distribution to DHCPv6 clients. The preference of the server. Shows whether rapid commit is enabled. If the interface mode is relay, the following information displays. Term Definition Relay Address The IPv6 address of the relay server. Relay Interface Number The relay server interface in format. Relay Remote ID If configured, shows the name of the relay remote. Option Flags Shows whether rapid commit is configured. If you use the statistics parameter, the command displays the IPv6 DHCP statistics for the specified interface. See show ipv6 dhcp statistics on page 416 for information about the output. clear ipv6 dhcp Use this command to clear DHCPv6 statistics for all interfaces or for a specific interface. Use the parameter to specify the interface. Format Mode clear ipv6 dhcp {statistics | interface statistics} Privileged EXEC IPv6 Commands 418