Netgear M4100-26G CLI Manual - Page 353

ProSafe M4100 and M7100 Managed Switches Term Filter Mode Sources Definition Possible values are Include or Exclude. The number of sources attached to the multicast group. Example: The following shows example CLI display output for the command. (Switch) #show ip igmp-proxy groups Interface Index 0/1 Group Address 225.4.4.4 Last Reporter Up Time Member State Filter Mode Sources 5.5.5.48 00:02:21 DELAY_MEMBER Include 3 226.4.4.4 5.5.5.48 00:02:21 DELAY_MEMBER Include 3 227.4.4.4 5.5.5.48 00:02:21 DELAY_MEMBER Exclude 0 228.4.4.4 5.5.5.48 00:02:21 DELAY_MEMBER Include 3 show ip igmp-proxy groups detail This command displays complete information about multicast groups that IGMP Proxy reported. It displays a table of entries with the following as the fields of each column. Format Modes show ip igmp-proxy groups detail • Privileged EXEC • User EXEC Term Definition Interface The interface number of the IGMP Proxy. Group Address The IP address of the multicast group. Last Reporter The IP address of host that last sent a membership report for the current group, on the network attached to the IGMP-Proxy interface (upstream interface). Up Time (in secs) The time elapsed since last created. Member State The status of the entry. Possible values are IDLE_MEMBER or DELAY_MEMBER. • IDLE_MEMBER - interface has responded to the latest group membership query for this group. • DELAY_MEMBER - interface is going to send a group membership report to respond to a group membership query for this group. Filter Mode Possible values are Include or Exclude. Sources The number of sources attached to the multicast group. IP Multicast Commands 353