Netgear M4100-26G CLI Manual - Page 344

ProSafe M4100 and M7100 Managed Switches no ip igmp query-interval This command resets the query interval for the specified interface to the default value. This is the frequency at which IGMP Host-Query packets are transmitted on this interface. Format Modes no ip igmp query-interval Interface Config ip igmp query-max-response-time This command configures the maximum response time interval for the specified interface, which is the maximum query response time advertised in IGMPv2 queries on this interface. The time interval is specified in tenths of a second. The range for is 0-255 tenths of a second. Default Format Mode 100 ip igmp query-max-response-time Interface Config no ip igmp query-max-response-time This command resets the maximum response time interval for the specified interface, which is the maximum query response time advertised in IGMPv2 queries on this interface to the default value. The maximum response time interval is reset to the default time. Format Mode no ip igmp query-max-response-time Interface Config ip igmp robustness This command configures the robustness that allows tuning of the interface. The robustness is the tuning for the expected packet loss on a subnet. If a subnet is expected to have a lot of loss, the Robustness variable might be increased for the interface. The range for is 1-255. Default Format Mode 2 ip igmp robustness Interface Config no ip igmp robustness This command sets the robustness value to default. Format Mode no ip igmp robustness Interface Config IP Multicast Commands 344