Netgear M4100-26G CLI Manual - Page 80

ProSafe M4100 and M7100 Managed Switches no dot1x max-req This command sets the maximum number of times the authenticator state machine on this port will transmit an EAPOL EAP Request/Identity frame before timing out the supplicant. Format Mode no dot1x max-req Interface Config dot1x max-users Use this command to set the maximum number of clients supported on the port when MAC-based dot1x authentication is enabled on the port. The maximum users supported per port is dependent on the product. The value is in the range 1 - 48. Default Format Mode 48 dot1x max-users Interface Config no dot1x max-users This command resets the maximum number of clients allowed per port to its default value. Format Mode no dot1x max-req Interface Config dot1x port-control This command sets the authentication mode to use on the specified port. Select force-unauthorized to specify that the authenticator PAE unconditionally sets the controlled port to unauthorized. Select force-authorized to specify that the authenticator PAE unconditionally sets the controlled port to authorized. Select auto to specify that the authenticator PAE sets the controlled port mode to reflect the outcome of the authentication exchanges between the supplicant, authenticator, and the authentication server. If the mac-based option is specified, MAC-based dot1x authentication is enabled on the port. Default Format Mode auto dot1x port-control {force-unauthorized | force-authorized | auto | mac-based} Interface Config Switching Commands 80