Netgear M4100-26G CLI Manual - Page 362
ipv6 mtu, ipv6 nd dad attempts, IPv6 Commands, ProSafe M4100 and M7100 Managed Switches
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 362 highlights
ProSafe M4100 and M7100 Managed Switches ipv6 mtu This command sets the maximum transmission unit (MTU) size, in bytes, of IPv6 packets on an interface. This command replaces the default or link MTU with a new MTU value. Note: The default MTU value for a tunnel interface is 1480. You cannot change this value. Default Format Mode 0 or link speed (MTU value (1500)) ipv6 mtu Interface Config no ipv6 mtu This command resets maximum transmission unit value to default value. Format Mode no ipv6 mtu Interface Config ipv6 nd dad attempts This command sets the number of duplicate address detection probes transmitted. Duplicate address detection verifies that an IPv6 address on an interface is unique. Default Format Mode 1 ipv6 nd dad attempts Interface Config no ipv6 nd dad attempts This command resets to number of duplicate address detection value to default value. Format Mode no ipv6 nd dad attempts Interface Config IPv6 Commands 362