Netgear M4100-26G CLI Manual - Page 537
logging syslog source-interface, show logging, no logging syslog
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 537 highlights
ProSafe M4100 and M7100 Managed Switches no logging syslog This command disables syslog logging. Format Mode no logging syslog Global Config logging syslog source-interface This command configures the syslog source-interface. Format Mode logging syslog source-interface { | {loopback } | {tunnel }} Global Config show logging This command displays logging configuration information. Format Mode show logging Privileged EXEC Term Definition Logging Client Local Port The port on the collector/relay to which syslog messages are sent. CLI Command Shows whether CLI Command logging is enabled. Logging Console Logging Shows whether console logging is enabled. Console Logging Severity Filter The minimum severity to log to the console log. Messages with an equal or lower numerical severity are logged. Buffered Logging Shows whether buffered logging is enabled. Syslog Logging Shows whether syslog logging is enabled. Log Messages Received Number of messages received by the log process. This includes messages that are dropped or ignored. Log Messages Dropped Number of messages that could not be processed due to error or lack of resources. Log Messages Relayed Number of messages sent to the collector/relay. Utility Commands 537