Netgear M4100-26G CLI Manual - Page 672
snmp-server community mode
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 672 highlights
ProSafe M4100 and M7100 Managed Switches station, and will use that machine's IP address for the client IP address. A value of 0.0.0.0 will allow access from any IP address. The name is the applicable community name. Default Format Mode 0.0.0.0 snmp-server community ipmask Global Config no snmp-server community ipmask Use this command to set a client IP mask for an SNMP community to 0.0.0.0. The name is the applicable community name. The community name might be up to 16 alphanumeric characters. Format Mode no snmp-server community ipmask Global Config snmp-server community mode Use this command to activate an SNMP community. If a community is enabled, an SNMP manager associated with this community manages the switch according to its access right. If the community is disabled, no SNMP requests using this community are accepted. In this case the SNMP manager associated with this community cannot manage the switch until the Status is changed back to Enable. Default Format Mode • private and public communities - enabled • other four - disabled snmp-server community mode Global Config no snmp-server community mode Use this command to deactivate an SNMP community. If the community is disabled, no SNMP requests using this community are accepted. In this case the SNMP manager associated with this community cannot manage the switch until the Status is changed back to Enable. Format Mode no snmp-server community mode Global Config Management Commands 672