Netgear M4100-26G CLI Manual - Page 56
vlan pvid, vlan tagging, no protocol vlan group all
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
ProSafe M4100 and M7100 Managed Switches no protocol vlan group all This command removes all interfaces from this protocol-based VLAN group that is identified by this . Format Mode no protocol vlan group all Global Config vlan pvid This command changes the VLAN ID per interface. Default Format Mode 1 vlan pvid Interface Config no vlan pvid This command sets the VLAN ID per interface to 1. Format Mode no vlan pvid Interface Config vlan tagging This command configures the tagging behavior for a specific interface in a VLAN to enabled. If tagging is enabled, traffic is transmitted as tagged frames. If tagging is disabled, traffic is transmitted as untagged frames. The vlan-list contains VlanId's in range . Separate non-consecutive IDs with ',' and no spaces and no zeros in between the range; Use '-' for range. Format Mode vlan tagging Interface Config no vlan tagging This command configures the tagging behavior for a specific interface in a VLAN to disabled. If tagging is disabled, traffic is transmitted as untagged frames. The vlan-list contains VlanId's in range . Separate non-consecutive IDs with ',' and no spaces and no zeros in between the range; Use '-' for range. Format Mode no vlan tagging Interface Config Switching Commands 56