Netgear M4100-26G CLI Manual - Page 54

ProSafe M4100 and M7100 Managed Switches no vlan protocol group name This command removes the name from a protocol-based VLAN group. Format Mode no vlan protocol group name Global Config vlan protocol group add protocol This command adds the protocol to the protocol-based VLAN identified by groupid. A group may have more than one protocol associated with it. Each interface and protocol combination can only be associated with one group. If adding a protocol to a group causes any conflicts with interfaces currently associated with the group, this command fails and the protocol is not added to the group. The possible values for protocol-list includes the keywords ip, arp, and ipx and hexadecimal or decimal values ranging from 0x0600 (1536) to 0xFFFF (65535). The protocol list can accept up to 16 protocols separated by a comma. Default Format Mode none vlan protocol group add protocol ethertype {|arp|ip|ipx} Global Config no vlan protocol group add protocol This command removes the from this protocol-based VLAN group that is identified by this . The possible values for protocol are ip, arp, and ipx. Format Mode no vlan protocol group add protocol ethertype {|arp|ip|ipx} Global Config protocol group This command attaches a to the protocol-based VLAN identified by . A group may only be associated with one VLAN at a time, however the VLAN association can be changed. Default Format Mode none protocol group VLAN Config Switching Commands 54