Netgear M4100-26G CLI Manual - Page 553

ProSafe M4100 and M7100 Managed Switches quit This command closes the current telnet connection or resets the current serial connection. The system asks you whether to save configuration changes before quitting. Format Modes quit • Privileged EXEC • User EXEC reload This command resets the switch without powering it off. Reset means that all network connections are terminated and the boot code executes. The switch uses the stored configuration to initialize the switch. You are prompted to confirm that the reset should proceed. The LEDs on the switch indicate a successful reset. Format Mode reload Privileged EXEC save This command makes the current configuration changes permanent by writing the configuration changes to system NVRAM. Format Mode save Privileged EXEC copy The copy command uploads and downloads files to and from the switch. You can also use the copy command to manage the dual images (image1 and image2) on the file system. Upload and download files from a server by using TFTP or Xmodem. SFTP and SCP are available as additional transfer methods if the software package supports secure management. Format Mode copy Privileged EXEC Replace the and parameters with the options in table below. For the source or destination, use one of the following values: {xmodem | tftp://|// [noval] | sftp|scp://@|||} Use the ias-users keyword to download the IAS user database file. When the IAS user's file is downloaded, the switch IAS user's database is replaced with the users and their attributes in the downloaded file. Utility Commands 553