Netgear M4100-26G CLI Manual - Page 405

ProSafe M4100 and M7100 Managed Switches Term OSPF Area ID Router Priority Retransmit Interval Hello Interval Dead Interval LSA Ack Interval Iftransit Delay Interval Authentication Type Metric Cost Passive Status OSPF MTU-ignore Definition The area ID associated with this interface. The router priority. The router priority determines which router is the designated router. The frequency, in seconds, at which the interface sends LSA. The frequency, in seconds, at which the interface sends Hello packets. The amount of time, in seconds, the interface waits before assuming a neighbor is down. The amount of time, in seconds, the interface waits before sending an LSA acknowledgement after receiving an LSA. The number of seconds the interface adds to the age of LSA packets before transmission. The type of authentication the interface performs on LSAs it receives. The priority of the path. Low costs have a higher priority than high costs. Shows whether the interface is passive or not. Shows whether to ignore MTU mismatches in database descriptor packets sent from neighboring routers. The following information only displays if OSPF is initialized on the interface: Term Definition OSPF Interface Broadcast LANs, such as Ethernet and IEEE 802.5, take the value broadcast. The OSPF Type Interface Type will be 'broadcast'. State The OSPF Interface States are: down, loopback, waiting, point-to-point, designated router, and backup designated router. Designated Router The router ID representing the designated router. Backup Designated Router The router ID representing the backup designated router. Number of Link Events The number of link events. Metric Cost The cost of the OSPF interface. show ipv6 ospf interface brief This command displays brief information for the IFO object or virtual interface tables. Format Modes show ipv6 ospf interface brief • Privileged EXEC • User EXEC IPv6 Commands 405