Netgear M4100-26G CLI Manual - Page 155
displays the following information, When you specify
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
ProSafe M4100 and M7100 Managed Switches show igmpsnooping This command displays IGMP Snooping information. Configured information is displayed whether or not IGMP Snooping is enabled. Format Mode show igmpsnooping [ | ] Privileged EXEC When the optional arguments or are not used, the command displays the following information: Term Definition Admin Mode Indicates whether or not IGMP Snooping is active on the switch. Multicast Control Frame The number of multicast control frames that are processed by the CPU. Count Interface Enabled for The list of interfaces on which IGMP Snooping is enabled. IGMP Snooping VLANS Enabled for IGMP The list of VLANS on which IGMP Snooping is enabled. Snooping When you specify the values, the following information appears: Term Definition IGMP Snooping Admin Mode Indicates whether IGMP Snooping is active on the interface. Fast Leave Mode Indicates whether IGMP Snooping Fast-leave is active on the interface. Group Membership Interval The amount of time in seconds that a switch will wait for a report from a particular group on a particular interface before deleting the interface from the entry. This value may be configured. Maximum Response Time The amount of time the switch waits after it sends a query on an interface because it did not receive a report for a particular group on that interface. This value may be configured. Multicast Router Expiry Time The amount of time to wait before removing an interface from the list of interfaces with multicast routers attached. The interface is removed if a query is not received. This value may be configured. When you specify a value for , the following information appears: Term Definition VLAN ID The VLAN ID. IGMP Snooping Indicates whether IGMP Snooping is active on the VLAN. Admin Mode Switching Commands 155