Netgear M4100-26G CLI Manual - Page 310

ProSafe M4100 and M7100 Managed Switches show dampening interface This command summarizes the number of interfaces configured with dampening and the number of interfaces being suppressed. Format Mode show dampening interface Privileged EXEC The following shows example CLI display output for the command. (netgear switch)# show dampening interface 2 interfaces are configured with dampening. 1 interface is being suppressed. show interface dampening This command displays the status and configured parameters of the interfaces configured with dampening. Format Mode show interface dampening Privileged EXEC Parameter Flaps Penalty Supp ReuseTm HalfL ReuseV SuppV MaxSTm MaxPenalty Restart Description The number times the link state of an interface changed from UP to DOWN. Accumulated Penalty. Indicates whether the interface is suppressed or not. Number of seconds until the interface is allowed to come up again. Configured half-life period. Configured reuse-threshold. Configured suppress threshold. Configured maximum suppress time in seconds. Maximum possible penalty. Configured restart penalty. Note: The CLI command clear counters resets the flap count to zero. The interface CLI command no shutdown resets the suppressed state to False. Routing Commands 310