Netgear M4100-26G CLI Manual - Page 536
emergency, alert, critical, error, warning, notice, debug, show logging hosts
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 536 highlights
ProSafe M4100 and M7100 Managed Switches no logging console This command disables logging to the console. Format Mode no logging console Global Config logging host This command enables logging to a host. You can configure up to eight hosts. The is the IP address of the logging host. The indicates the type of address ipv4 or ipv6 or dns being passed. The value is a port number from 1 to 65535. You can specify the value as either an integer from 0 to 7 or symbolically through one of the following keywords: emergency (0), alert (1), critical (2), error (3), warning (4), notice (5), info (6), or debug (7). The end user can configure either an IPv4 or IPv6 address or a host name for a Syslog collector among the list of servers. Default Format Mode • port-514 • level-critical (2) logging host [][] Global Config logging host remove This command disables logging to host. See show logging hosts on page 538 for a list of host indexes. Format Mode logging host remove Global Config logging syslog This command enables syslog logging. The parameter is an integer with a range of 1-65535. Default Format Mode disabled logging syslog [port ] Global Config Utility Commands 536