Netgear M4100-26G CLI Manual - Page 259

ProSafe M4100 and M7100 Managed Switches show bootpdhcprelay This command displays the BootP/DHCP Relay information. Format Modes show bootpdhcprelay • Privileged EXEC • User EXEC Term Definition Maximum Hop The maximum allowable relay agent hops. Count Minimum Wait Time (Seconds) The minimum wait time. Admin Mode Indicates whether relaying of requests is enabled or disabled. Server IP Address The IP address for the BootP/DHCP Relay server. Circuit Id Option Mode The DHCP circuit Id option which might be enabled or disabled. Requests Received The number or requests received. Requests Relayed The number of requests relayed. Packets Discarded The number of packets discarded. IP Helper Commands This section describes the commands to configure a DHCP relay agent with multiple DHCP server addresses per routing interface, and to use different server addresses for client packets arriving on different interfaces on the relay agent. clear ip helper statistics Use this command to reset the statistics displayed in the show ip helper statistics command to zero. Format Mode clear ip helper statistics Privileged EXEC ip helper-address (Global Config) Use the Global Configuration ip helper-address command to have the switch forward User Datagram Protocol (UDP) broadcasts received on an interface. To disable the forwarding of broadcast packets to specific addresses, use the no form of this command. Routing Commands 259