Netgear M4100-26G CLI Manual - Page 554

ProSafe M4100 and M7100 Managed Switches In the copy url ias-users command, for url, use one of the following for the IAS user's file: { { tftp:// | // } | { sftp | scp://@//} } The maximum length for the file path is 160 characters, and the maximum length for the file name is 31 characters. For TFTP, SFTP, and SCP, the parameter is the IP address or host name of the server, is the path to the file, and is the name of the file you want to upload or download. For SFTP and SCP, the parameter is the username for logging into the remote server via SSH. Note: is also a valid parameter for routing packages that support IPv6. For switches that support a USB device, the copy command can be used to transfer files from and to the USB device. The syntax for the USB file is: usb://. The USB device can be either a source or destination in the copy command. It cannot be used as both source and destination in a given copy command. Note: Remember to upload the existing Switch CLI.cfg file off the switch prior to loading a new release image in order to make a backup. Parameters for the copy command are listed in the following table: Source nvram:techsupport nvram:backup-config Destination nvram:startup-config nvram:clibanner nvram:cpupktcapture.pcap nvram:errorlog nvram:log nvram:script nvram:startup-config nvram:backup-config nvram:startup-config Description Uploads the Technical Support file. Copies the backup configuration to the startup configuration. Copies the CLI banner to a server. Uploads the CPU packets capture file. Copies the error log file to a server. Copies the log file to a server. Copies a specified configuration script file to a server. Copies the startup configuration to the backup configuration. Copies the startup configuration to a server. Utility Commands 554