Netgear M4100-26G CLI Manual - Page 234

ProSafe M4100 and M7100 Managed Switches Format Mode ip mtu Interface Config no ip mtu This command resets the ip mtu to the default value. Format Mode no ip mtu Interface Config encapsulation This command configures the link layer encapsulation type for the packet. The encapsulation type can be ethernet or snap. Default Format Mode ethernet encapsulation {ethernet | snap} Interface Config Note: Routed frames are always Ethernet encapsulated when a frame is routed to a VLAN. clear ip route all This command removes all the route entries learned over the network. Format Mode Protocol Total Number of Routes clear ip route all Privileged EXEC Tells which protocol added the specified route. The possibilities are: local, static, OSPF, or RIP. The total number of routes. clear ip route counters This command resets to zero the IPv4 routing table counters reported in show ip route summary. The command resets only the event counters. Counters that report the current state of the routing table, such as the number of routes of each type, are not reset. Format Mode clear ip route counters Privileged EXEC Routing Commands 234