Netgear M4100-26G CLI Manual - Page 128
dhcp l2relay remote-id vlan, dhcp l2relay vlan
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
ProSafe M4100 and M7100 Managed Switches Separate non-consecutive IDs with a comma (,), and do not insert spaces or zeros in between the range. Use a dash (-) for the range. Format Mode dhcp l2relay circuit-id vlan Global Config no dhcp l2relay circuit-id vlan Use this parameter to clear the DHCP Option-82 Circuit ID for a VLAN. Format Mode no dhcp l2relay circuit-id vlan Global Config dhcp l2relay remote-id vlan Use this parameter to set the DHCP Option-82 Remote ID for a VLAN and subscribed service (based on subscription-name). The vlan-list range is 1-4093. Separate non-consecutive IDs with a comma (,), and do not insert spaces or zeros between the range. Use a dash (-) for the range. Format Mode dhcp l2relay remote-id vlan Global Config no dhcp l2relay remote-id vlan Use this parameter to clear the DHCP Option-82 Remote ID for a VLAN and subscribed service (based on subscription-name). Format Mode no dhcp l2relay remote-id vlan vlan-list Global Config dhcp l2relay vlan Use this command to enable the DHCP L2 Relay agent for a set of VLANs. All DHCP packets which arrive on interfaces in the configured VLAN are subject to L2 Relay processing. vlan-list range is 1-4093. Separate non-consecutive IDs with a comma (,), and do not insert spaces or zeros between the range. Use a dash (-) for the range. Default Format Mode disabled dhcp l2relay vlan Global Config Switching Commands 128