Netgear M4100-26G CLI Manual - Page 545

ProSafe M4100 and M7100 Managed Switches port Use this command to configure the TCP port to use for communication with the SMTP server. The recommended port for TLSv1 is 465, and for no security (i.e. none) it is 25. However, any nonstandard port in the range 1-65,535 is also allowed. Default Format Mode 25 port {465 | 25 | 1-65535} Mail Server Config username Use this command to configure the login ID that the switch uses to authenticate with the SMTP server. Default Format Mode admin username name Mail Server Config password Use this command to configure the password that the switch uses to authenticate with the SMTP server. Format Mode password password Mail Server Config show mail-server config Use this command to display information about the email alert configuration. Format Mode show mail-server {ip-address | hostname | all } config Privileged EXEC Term Definition No of mail servers configured The number of SMTP servers configured on the switch. Email Alert Mail Server Address The IPv4/IPv6 address or DNS hostname of the configured SMTP server. Email Alert Mail Server Port The TCP port the switch uses to send email to the SMTP server. Email Alert Security Protocol The security protocol (TLS or none) the switch uses to authenticate with the SMTP server. Utility Commands 545