Netgear M4100-26G CLI Manual - Page 215
mvr mode, mvr querytime, no mvr group
View all Netgear M4100-26G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 215 highlights
ProSafe M4100 and M7100 Managed Switches no mvr group This command removes the MVR membership group. Format Mode no mvr group [count] Global Config mvr mode This command changes the MVR mode type. If the mode is set to compatible, the switch does not learn multicast groups; they need to be configured by the operator as the protocol does not forward joins from the hosts to the router. To operate in this mode, the IGMP router needs to be statically configured to transmit all required multicast streams to the MVR switch. If the mode is set to dynamic, the switch learns existing multicast groups by snooping the IGMP queries from router on source ports and forwarding the IGMP joins from the hosts to the IGMP router on the multicast VLAN (with appropriate translation of the VLAN ID). Format Mode Default mvr mode { compatible |dynamic } Global Config compatible no mvr mode This command sets the mode type to the default value. Format Mode no mvr mode Global Config mvr querytime This command sets the MVR query response time. Format Mode Default mvr querytime Global Config 5 no mvr querytime This command sets the MVR query response time to the default value. Format Mode no mvr querytime Global Config Multicast VLAN Registration (MVR) 215