Netgear M4100-26G CLI Manual - Page 705

ProSafe M4100 and M7100 Managed Switches no network ipv6 gateway Use this command to remove IPv6 gateways on the network port interface. Format Mode no network ipv6 gateway Privileged EXEC show network ndp Use this command to display NDP cache information for the network port. Default Format Mode enabled show network ndp • Privileged EXEC • User EXEC Term Definition IPv6 Address The IPv6 address of the interface. MAC Address The MAC Address used. isRtr Specifies the router flag. Neighbor State The state of the neighbor cache entry. The possible values are: Reachable, Delay. Age Updated The time in seconds that has elapsed since an entry was added to the cache. The following shows sample CLI display output for the command: (switch) #show network ndp IPv6 Address 3017::204:76FF:FE73:423A FE80::204:76FF:FE73:423A MAC Address 00:04:76:73:42:3a 00:04:76:73:42:3a isRtr ----- Neighbor State -------- Reachable Delay Age Updated ------447535 447540 show network ipv6 dhcp statistics Use this command to display the statistics of the DHCPv6 client running on the network management interface. Format Mode show network ipv6 dhcp statistics • Privileged EXEC • User EXEC Management Commands 705