Netgear M4100-26G CLI Manual - Page 130

ProSafe M4100 and M7100 Managed Switches show dhcp l2relay interface Use this command to display DHCP L2 relay configuration specific to interfaces. Format Mode show dhcp l2relay interface {all | interface-num} Privileged EXEC Example: The following shows example CLI display output for the command. (switch) #show dhcp l2relay interface all DHCP L2 Relay is Enabled. Interface L2RelayMode TrustMode ---------- ----------- 0/2 Enabled untrusted 0/4 Disabled trusted show dhcp l2relay stats interface Use this command to display statistics specific to DHCP L2 Relay configured interface. Format Mode show dhcp l2relay stats interface {all | interface-num} Privileged EXEC Example: The following shows example CLI display output for the command. (switch) #show dhcp l2relay stats interface all DHCP L2 Relay is Enabled. Interface UntrustedServer UntrustedClient TrustedServer TrustedClient MsgsWithOpt82 MsgsWithOpt82 MsgsWithoutOpt82 MsgsWithoutOpt82 0/1 0 0 0 0 0/2 0 0 3 7 0/3 0 0 0 0 0/4 0 12 0 0 0/5 0 0 0 0 0/6 3 0 0 0 0/7 0 0 0 0 0/8 0 0 0 0 0/9 0 0 0 0 show dhcp l2relay agent-option vlan Use this command to display the DHCP L2 Relay Option-82 configuration specific to VLAN. Format Mode show dhcp l2relay agent-option vlan vlan-range Privileged EXEC Example: The following shows example CLI display output for the command. (switch) #show dhcp l2relay agent-option vlan 5-10 DHCP L2 Relay is Enabled. VLAN Id L2 Relay CircuitId RemoteId --------- ---------- ----------- ------------ Switching Commands 130