Netgear M4100-26G CLI Manual - Page 293

ProSafe M4100 and M7100 Managed Switches show ip ospf asbr This command displays the internal OSPF routing table entries to Autonomous System Boundary Routers (ASBR). This command takes no options. Format Mode show ip ospf asbr • Privileged EXEC • User EXEC Term Type Router ID Cost Area ID Next Hop Next Hop Intf Definition The type of the route to the destination. It can be one of the following values: intra - Intra-area route inter - Inter-area route Router ID of the destination. Cost of using this route. The area ID of the area from which this route is learned. Next hop toward the destination. The outgoing router interface to use when forwarding traffic to the next hop. show ip ospf database This command displays information about the link state database when OSPF is enabled. If you do not enter any parameters, the command displays the LSA headers for all areas. Use the optional parameter to display database information about a specific area. Use the optional parameters to specify the type of link state advertisements to display. Parameter asbr-summary external network nssa-external opaque-area opaque-as opaque-link router summary Description Use asbr-summary to show the autonomous system boundary router (ASBR) summary LSAs. Use external to display the external LSAs. Use network to display the network LSAs. Use nssa-external to display NSSA external LSAs. Use opaque-area to display area opaque LSAs. Use opaque-as to display AS opaque LSAs. Use opaque-link to display link opaque LSAs. Use router to display router LSAs. Use summary to show the LSA database summary information. Routing Commands 293